Flexcharge PV14 12V 14 Amp Charge Controller Photovaltaic Charging System Solar

Description

Flexcharge PV14 12 | 14 Amp Charge Controller for Photovaltaic Charging System
(Multiple Values)
Flexcharge
14 Amp Charge Controller
for 12 Volt Photovaltaic Charging System
(Solar Only Applications)
Model: PV14-12
US Manufactured Long Service Life and Performance History
We are a stocking Flexcharge dealer listed here on SES Flexcharge's dealer page:
http://www.flexcharge.com/Where-to-buy.html
The following is copyrighted by SES Flexcharge.
The PV14  is a cost effective shunting regulator designed for 12V Solar Only applications with a maximum solar charging current of 14A.   The PV14 controller is easily expandable to handle charging currents up to 100A or more.  We engineered this controller to be extremely efficient, accurate, and small (3" x  4.75").  It is Ideal for use in a marine environment. Use with Lead Acid flooded, AGM, or Gel battery technologies.   Do not use on Lithium batteries of any type.  Like the NC25A it also uses only 4mA to operate its circuitry.  This controller is not for use with outboard motors or any generator based charging system unless it is expanded.
Efficiency
The PV14 is an all solid state design using the highest efficiency components.   All shunting type regulators must use a blocking diode in the charging path to block the battery voltage when the controller is regulating.  The heat sink on the PV14 is used to dissipate the heat generated by the components when the controller is shunting and the battery can no longer take any more charge.
Dependability
We took great care to design the PV14 for long term operation in unattended locations; extensive transient voltage protection;  high steady state voltage protection (it is not affected by continuous charging input voltages up to 50V, the point where the transient voltage protection activates); fully sealed electronics for 100% humidity operation; etc...  The PV14 is designed for Install and Forget operation.
Simple to Operate
The PV14 includes an easy to read Charge Indicator.  The peak charge voltage is factory set so there are no user adjustments to contend with.  System wire connections are made by connecting to the controllers wire pigtails either by soldering or via a terminal strip.
Easy Upgrades
Upgrading the controller to regulate form 30 up to 500 amperes can be accomplished easily and  is relatively inexpensive. Contact Flexcharge for details.
Features
100% Waterproof electronics for mounting in a marine environment.
Uses Super High Efficiency Solid State Surface Mount Components.
Oversize heat sink to keep the internal components cool .
Circuit is machine assembled in the USA to ISO 9000 standards.
Internal Precision Voltage Reference for high accuracy voltage regulation.
Charging Indicator.
14 amp charging capacity for small to intermediate size solar arrays.
Expandable to handle 35A, 60A or 100A of charging current, and multiple charging sources.
35A, 60A, or 100A Charge Divert option.
Consumes less than 5mA while charging and only 2.6mA at night.
Built in Isolation prevents nighttime back flow of electricity from your batteries to the solar panel(s).
Uses Energy State Taper charge algorithm for fast battery charging and super low battery electrolyte depletion. Looks for the full charged resting voltage of the battery to protect against overcharging.
Charges a Zero Volt battery with full charge current. Most controllers will not charge a zero volt battery.
No power wasting sample periods.
Completely silent operation.
UL listed encapsulation.
OPTIONS
EXPANDEDABLE FOR HIGH CAPACITY or MULTIPLE CHARGING SOURCES
PV14 Operating Characteristics
12V Unit
Parameter
MIN.
TYP.
MAX.
INPUT VOLTAGE
(BAT or PV)
0V
-
30V
PROGRAMMED OVERSHOOT VOLTAGE
(MICRO - EQUALIZATION)
-
-
16.3V
CHARGING CURRENT
4mA
-
15A
CONTROLLER STANDBY CURRENT (NIGHT)
2mA
2.6mA
3mA
CONTROLLER STANDBY CURRENT (Charging)
4mA
5mA
6mA
CHARGE DISCONNECT VOLTAGE
(Regulation Voltage)
14.20
14.25V
14.30V
CHARGE RECONNECT VOLTAGE
13.50V
13.60V
13.70V
VOLTAGE DROP ACROSS CONTROLLER
0.2V
0.4V
0.56V
TRANSIENT SURGE SUPPRESSION
-
-
600W
HUMIDITY
5%
60%
100%
OPERATING TEMPERATURE
-40°C
25°C
60°C
CASE SIZE
H=1.2" W=4.75" L=3.0"
FREE! Sellers: Add a FREE map to your listings. FREE!
Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application
Hurricane Wind Power
2019
Corporate America Today
2019 Best Off-Grid
Renewable Energy
Product Supplier - USA
UP TO 50% DISCOUNTS
TOP BRANDS
Payment
Shipping
Returns
Payment
Shipping
Returns
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
We offer
Fast shipping
on all orders!
Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class).
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 14 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
See our other items
Thank you for visiting our Ebay store!
(Multiple Values) Flexcharge 14 Amp Charge Controller for 12 Volt Photovaltaic Charging System (Solar Only Applications) Model: PV14-12 US Manufactured Long Service Life and Performance History We are a stocking Flexcharge dealer listed here on SES Flexcharge's dealer page: [http://www.flexcharge.com/Where-to-buy.html] (http://www.flexcharge.com/Where-to-buy.html) The following is copyrighted by SES Flexcharge. The PV14 is a cost effective shunting regulator designed for 12V Solar Only applications with a maximum solar charging current of 14A. The PV14 controller is easily expandable to handle charging currents up to 100A or more. We engineered this controller to be extremely efficient, accurate, and small (3" x 4.75"). It is Ideal for use in a marine environment. Use with Lead Acid flooded, AGM, or Gel battery technologies. Do not use on Lithium batteries of any type. Like the NC25A it also uses only 4mA to operate its circuitry. This controller is not for use with outboard motors or any generator based charging system unless it is expanded. Efficiency The PV14 is an all solid state design using the highest efficiency components. All shunting type regulators must use a blocking diode in the charging path to block the battery voltage when the controller is regulating. The heat sink on the PV14 is used to dissipate the heat generated by the components when the controller is shunting and the battery can no longer take any more charge. Dependability We took great care to design the PV14 for long term operation in unattended locations; extensive transient voltage protection; high steady state voltage protection (it is not affected by continuous charging input voltages up to 50V, the point where the transient voltage protection activates); fully sealed electronics for 100% humidity operation; etc... The PV14 is designed for Install and Forget operation. Simple to Operate The PV14 includes an easy to read Charge Indicator. The peak charge voltage is factory set so there are no user adjustments to contend with. System wire connections are made by connecting to the controllers wire pigtails either by soldering or via a terminal strip. Easy Upgrades Upgrading the controller to regulate form 30 up to 500 amperes can be accomplished easily and is relatively inexpensive. Contact Flexcharge for details. Features ---100% Waterproof electronics for mounting in a marine environment. ---Uses Super High Efficiency Solid State Surface Mount Components. ---Oversize heat sink to keep the internal components cool . ---Circuit is machine assembled in the USA to ISO 9000 standards. ---Internal Precision Voltage Reference for high accuracy voltage regulation. ---Charging Indicator. ---14 amp charging capacity for small to intermediate size solar arrays. ---Expandable to handle 35A, 60A or 100A of charging current, and multiple charging sources. ---35A, 60A, or 100A Charge Divert option. ---Consumes less than 5mA while charging and only 2.6mA at night. ---Built in Isolation prevents nighttime back flow of electricity from your batteries to the solar panel(s). ---Uses Energy State Taper charge algorithm for fast battery charging and super low battery electrolyte depletion. Looks for the full charged resting voltage of the battery to protect against overcharging. ---Charges a Zero Volt battery with full charge current. Most controllers will not charge a zero volt battery. ---No power wasting sample periods. ---Completely silent operation. ---UL listed encapsulation. OPTIONS EXPANDEDABLE FOR HIGH CAPACITY or MULTIPLE CHARGING SOURCES PV14 Operating Characteristics 12V Unit Parameter MIN. TYP. MAX. INPUT VOLTAGE (BAT or PV) 0V - 30V PROGRAMMED OVERSHOOT VOLTAGE (MICRO - EQUALIZATION) - - 16.3V CHARGING CURRENT 4mA - 15A CONTROLLER STANDBY CURRENT (NIGHT) 2mA 2.6mA 3mA CONTROLLER STANDBY CURRENT (Charging) 4mA 5mA 6mA CHARGE DISCONNECT VOLTAGE (Regulation Voltage) 14.20 14.25V 14.30V CHARGE RECONNECT VOLTAGE 13.50V 13.60V 13.70V VOLTAGE DROP ACROSS CONTROLLER 0.2V 0.4V 0.56V TRANSIENT SURGE SUPPRESSION - - 600W HUMIDITY 5% 60% 100% OPERATING TEMPERATURE -40°C 25°C 60°C CASE SIZE H=1.2" W=4.75" L=3.0" [FREE! Sellers: Add a FREE map to your listings. FREE!] (http://newage.mystoremaps.com/echo/tagLine?sid=cea073c8-fc6f-494f-9ca5-610e8850a127&tid=2) Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application
Flexcharge PV14 12 | 14 Amp Charge Controller for Photovaltaic Charging System
(Multiple Values)
Flexcharge
14 Amp Charge Controller
for 12 Volt Photovaltaic Charging System
(Solar Only Applications)
Model: PV14-12
US Manufactured Long Service Life and Performance History
We are a stocking Flexcharge dealer listed here on SES Flexcharge's dealer page:
http://www.flexcharge.com/Where-to-buy.html
The following is copyrighted by SES Flexcharge.
The PV14  is a cost effective shunting regulator designed for 12V Solar Only applications with a maximum solar charging current of 14A.   The PV14 controller is easily expandable to handle charging currents up to 100A or more.  We engineered this controller to be extremely efficient, accurate, and small (3" x  4.75").  It is Ideal for use in a marine environment. Use with Lead Acid flooded, AGM, or Gel battery technologies.   Do not use on Lithium batteries of any type.  Like the NC25A it also uses only 4mA to operate its circuitry.  This controller is not for use with outboard motors or any generator based charging system unless it is expanded.
Efficiency
The PV14 is an all solid state design using the highest efficiency components.   All shunting type regulators must use a blocking diode in the charging path to block the battery voltage when the controller is regulating.  The heat sink on the PV14 is used to dissipate the heat generated by the components when the controller is shunting and the battery can no longer take any more charge.
Dependability
We took great care to design the PV14 for long term operation in unattended locations; extensive transient voltage protection;  high steady state voltage protection (it is not affected by continuous charging input voltages up to 50V, the point where the transient voltage protection activates); fully sealed electronics for 100% humidity operation; etc...  The PV14 is designed for Install and Forget operation.
Simple to Operate
The PV14 includes an easy to read Charge Indicator.  The peak charge voltage is factory set so there are no user adjustments to contend with.  System wire connections are made by connecting to the controllers wire pigtails either by soldering or via a terminal strip.
Easy Upgrades
Upgrading the controller to regulate form 30 up to 500 amperes can be accomplished easily and  is relatively inexpensive. Contact Flexcharge for details.
Features
100% Waterproof electronics for mounting in a marine environment.
Uses Super High Efficiency Solid State Surface Mount Components.
Oversize heat sink to keep the internal components cool .
Circuit is machine assembled in the USA to ISO 9000 standards.
Internal Precision Voltage Reference for high accuracy voltage regulation.
Charging Indicator.
14 amp charging capacity for small to intermediate size solar arrays.
Expandable to handle 35A, 60A or 100A of charging current, and multiple charging sources.
35A, 60A, or 100A Charge Divert option.
Consumes less than 5mA while charging and only 2.6mA at night.
Built in Isolation prevents nighttime back flow of electricity from your batteries to the solar panel(s).
Uses Energy State Taper charge algorithm for fast battery charging and super low battery electrolyte depletion. Looks for the full charged resting voltage of the battery to protect against overcharging.
Charges a Zero Volt battery with full charge current. Most controllers will not charge a zero volt battery.
No power wasting sample periods.
Completely silent operation.
UL listed encapsulation.
OPTIONS
EXPANDEDABLE FOR HIGH CAPACITY or MULTIPLE CHARGING SOURCES
PV14 Operating Characteristics
12V Unit
Parameter
MIN.
TYP.
MAX.
INPUT VOLTAGE
(BAT or PV)
0V
-
30V
PROGRAMMED OVERSHOOT VOLTAGE
(MICRO - EQUALIZATION)
-
-
16.3V
CHARGING CURRENT
4mA
-
15A
CONTROLLER STANDBY CURRENT (NIGHT)
2mA
2.6mA
3mA
CONTROLLER STANDBY CURRENT (Charging)
4mA
5mA
6mA
CHARGE DISCONNECT VOLTAGE
(Regulation Voltage)
14.20
14.25V
14.30V
CHARGE RECONNECT VOLTAGE
13.50V
13.60V
13.70V
VOLTAGE DROP ACROSS CONTROLLER
0.2V
0.4V
0.56V
TRANSIENT SURGE SUPPRESSION
-
-
600W
HUMIDITY
5%
60%
100%
OPERATING TEMPERATURE
-40°C
25°C
60°C
CASE SIZE
H=1.2" W=4.75" L=3.0"
FREE! Sellers: Add a FREE map to your listings. FREE!
Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application
Hurricane Wind Power
2019
Corporate America Today
2019 Best Off-Grid
Renewable Energy
Product Supplier - USA
UP TO 50% DISCOUNTS
TOP BRANDS
See our other items
Payment
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
Shipping
We offer
Fast shipping
on all orders!
Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class).
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
Returns
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 14 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
Thank you for visiting our Ebay store!
(Multiple Values)
Flexcharge
14 Amp Charge Controller
for 12 Volt Photovaltaic Charging System
(Solar Only Applications)
Model: PV14-12
US Manufactured Long Service Life and Performance History
We are a stocking Flexcharge dealer listed here on SES Flexcharge's dealer page:
http://www.flexcharge.com/Where-to-buy.html
The following is copyrighted by SES Flexcharge.
The PV14  is a cost effective shunting regulator designed for 12V Solar Only applications with a maximum solar charging current of 14A.   The PV14 controller is easily expandable to handle charging currents up to 100A or more.  We engineered this controller to be extremely efficient, accurate, and small (3" x  4.75").  It is Ideal for use in a marine environment. Use with Lead Acid flooded, AGM, or Gel battery technologies.   Do not use on Lithium batteries of any type.  Like the NC25A it also uses only 4mA to operate its circuitry.  This controller is not for use with outboard motors or any generator based charging system unless it is expanded.
Efficiency
The PV14 is an all solid state design using the highest efficiency components.   All shunting type regulators must use a blocking diode in the charging path to block the battery voltage when the controller is regulating.  The heat sink on the PV14 is used to dissipate the heat generated by the components when the controller is shunting and the battery can no longer take any more charge.
Dependability
We took great care to design the PV14 for long term operation in unattended locations; extensive transient voltage protection;  high steady state voltage protection (it is not affected by continuous charging input voltages up to 50V, the point where the transient voltage protection activates); fully sealed electronics for 100% humidity operation; etc...  The PV14 is designed for Install and Forget operation.
Simple to Operate
The PV14 includes an easy to read Charge Indicator.  The peak charge voltage is factory set so there are no user adjustments to contend with.  System wire connections are made by connecting to the controllers wire pigtails either by soldering or via a terminal strip.
Easy Upgrades
Upgrading the controller to regulate form 30 up to 500 amperes can be accomplished easily and  is relatively inexpensive. Contact Flexcharge for details.
Features
100% Waterproof electronics for mounting in a marine environment.
Uses Super High Efficiency Solid State Surface Mount Components.
Oversize heat sink to keep the internal components cool .
Circuit is machine assembled in the USA to ISO 9000 standards.
Internal Precision Voltage Reference for high accuracy voltage regulation.
Charging Indicator.
14 amp charging capacity for small to intermediate size solar arrays.
Expandable to handle 35A, 60A or 100A of charging current, and multiple charging sources.
35A, 60A, or 100A Charge Divert option.
Consumes less than 5mA while charging and only 2.6mA at night.
Built in Isolation prevents nighttime back flow of electricity from your batteries to the solar panel(s).
Uses Energy State Taper charge algorithm for fast battery charging and super low battery electrolyte depletion. Looks for the full charged resting voltage of the battery to protect against overcharging.
Charges a Zero Volt battery with full charge current. Most controllers will not charge a zero volt battery.
No power wasting sample periods.
Completely silent operation.
UL listed encapsulation.
OPTIONS
EXPANDEDABLE FOR HIGH CAPACITY or MULTIPLE CHARGING SOURCES
PV14 Operating Characteristics
12V Unit
Parameter
MIN.
TYP.
MAX.
INPUT VOLTAGE
(BAT or PV)
0V
-
30V
PROGRAMMED OVERSHOOT VOLTAGE
(MICRO - EQUALIZATION)
-
-
16.3V
CHARGING CURRENT
4mA
-
15A
CONTROLLER STANDBY CURRENT (NIGHT)
2mA
2.6mA
3mA
CONTROLLER STANDBY CURRENT (Charging)
4mA
5mA
6mA
CHARGE DISCONNECT VOLTAGE
(Regulation Voltage)
14.20
14.25V
14.30V
CHARGE RECONNECT VOLTAGE
13.50V
13.60V
13.70V
VOLTAGE DROP ACROSS CONTROLLER
0.2V
0.4V
0.56V
TRANSIENT SURGE SUPPRESSION
-
-
600W
HUMIDITY
5%
60%
100%
OPERATING TEMPERATURE
-40°C
25°C
60°C
CASE SIZE
H=1.2" W=4.75" L=3.0"
FREE! Sellers: Add a FREE map to your listings. FREE!
Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application