Morningstar RD-1 Relay Driver - Logic Module Accessory

Description

Morningstar RD-1 Relay Driver - Logic Module Accessory
Morningstar Corporation
Relay Driver RD-1
Morningstar’s new Relay Driver provides high level system control functions(such as high/low voltage alarms, load control and generator start) at a lower cost than other alarm and generator start packages.
* One or more of Morningstar’s TriStar controllers coupled with the Relay Driver will control hundreds of amps at 12-48VDC with sophisticated features at a much lower cost than comparable large PV controllers. The Relay Driver will read the digital data inputs from the TriStar.
* In systems using other controllers, the Relay Driver will provide similar functionality based on battery voltage or input voltages from other sources.
* The Relay Driver controls four independent relay driver outputs for high/low alarm contacts, generator start functions, load control, temperature control settings and auxiliary AC backup charge control.
* The Relay Driver may be mounted to a DIN rail and is fully programmable with the included PC software via serial RS-232 port connection. Data is stored in non-volatile memory.
* In external slave mode, the Relay Driver can be controlled via the RS-232 serial connection by any MODBUS compatible device, local or remote.
System Voltage
Max Channel Current
Min Operating Voltage
Max Operating Voltage
Self Consumption
Temp Sensor Range
Dimensions
Weight
12-48 Volts
750 mA
8 Volts
68 Volts
<20 mA
-40°C to +85°C
6.4" x 3.2" x 1.3"
(16.3 cm x 8.1 cm x 3.3 cm)
0.4 lb
(0.2 kg)
FREE! Sellers: Add a FREE map to your listings. FREE!
Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application
Hurricane Wind Power
2019
Corporate America Today
2019 Best Off-Grid
Renewable Energy
Product Supplier - USA
UP TO 50% DISCOUNTS
TOP BRANDS
Payment
Shipping
Returns
Payment
Shipping
Returns
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
We offer
Fast shipping
on all orders!
Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class).
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 14 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
See our other items
Thank you for visiting our Ebay store!
Morningstar Corporation Relay Driver RD-1 Morningstar’s new Relay Driver provides high level system control functions(such as high/low voltage alarms, load control and generator start) at a lower cost than other alarm and generator start packages. * One or more of Morningstar’s TriStar controllers coupled with the Relay Driver will control hundreds of amps at 12-48VDC with sophisticated features at a much lower cost than comparable large PV controllers. The Relay Driver will read the digital data inputs from the TriStar. * In systems using other controllers, the Relay Driver will provide similar functionality based on battery voltage or input voltages from other sources. * The Relay Driver controls four independent relay driver outputs for high/low alarm contacts, generator start functions, load control, temperature control settings and auxiliary AC backup charge control. * The Relay Driver may be mounted to a DIN rail and is fully programmable with the included PC software via serial RS-232 port connection. Data is stored in non-volatile memory. * In external slave mode, the Relay Driver can be controlled via the RS-232 serial connection by any MODBUS compatible device, local or remote. System Voltage Max Channel Current Min Operating Voltage Max Operating Voltage Self Consumption Temp Sensor Range Dimensions Weight 12-48 Volts 750 mA 8 Volts 68 Volts <20 mA -40°C to +85°C 6.4" x 3.2" x 1.3" (16.3 cm x 8.1 cm x 3.3 cm) 0.4 lb (0.2 kg) [FREE! Sellers: Add a FREE map to your listings. FREE!] (http://newage.mystoremaps.com/echo/tagLine?sid=cea073c8-fc6f-494f-9ca5-610e8850a127&tid=2) Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application
Morningstar RD-1 Relay Driver - Logic Module Accessory
Morningstar Corporation
Relay Driver RD-1
Morningstar’s new Relay Driver provides high level system control functions(such as high/low voltage alarms, load control and generator start) at a lower cost than other alarm and generator start packages.
* One or more of Morningstar’s TriStar controllers coupled with the Relay Driver will control hundreds of amps at 12-48VDC with sophisticated features at a much lower cost than comparable large PV controllers. The Relay Driver will read the digital data inputs from the TriStar.
* In systems using other controllers, the Relay Driver will provide similar functionality based on battery voltage or input voltages from other sources.
* The Relay Driver controls four independent relay driver outputs for high/low alarm contacts, generator start functions, load control, temperature control settings and auxiliary AC backup charge control.
* The Relay Driver may be mounted to a DIN rail and is fully programmable with the included PC software via serial RS-232 port connection. Data is stored in non-volatile memory.
* In external slave mode, the Relay Driver can be controlled via the RS-232 serial connection by any MODBUS compatible device, local or remote.
System Voltage
Max Channel Current
Min Operating Voltage
Max Operating Voltage
Self Consumption
Temp Sensor Range
Dimensions
Weight
12-48 Volts
750 mA
8 Volts
68 Volts
<20 mA
-40°C to +85°C
6.4" x 3.2" x 1.3"
(16.3 cm x 8.1 cm x 3.3 cm)
0.4 lb
(0.2 kg)
FREE! Sellers: Add a FREE map to your listings. FREE!
Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application
Hurricane Wind Power
2019
Corporate America Today
2019 Best Off-Grid
Renewable Energy
Product Supplier - USA
UP TO 50% DISCOUNTS
TOP BRANDS
See our other items
Payment
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
Shipping
We offer
Fast shipping
on all orders!
Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class).
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
Returns
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 14 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
Thank you for visiting our Ebay store!
Morningstar Corporation
Relay Driver RD-1
Morningstar’s new Relay Driver provides high level system control functions(such as high/low voltage alarms, load control and generator start) at a lower cost than other alarm and generator start packages.
* One or more of Morningstar’s TriStar controllers coupled with the Relay Driver will control hundreds of amps at 12-48VDC with sophisticated features at a much lower cost than comparable large PV controllers. The Relay Driver will read the digital data inputs from the TriStar.
* In systems using other controllers, the Relay Driver will provide similar functionality based on battery voltage or input voltages from other sources.
* The Relay Driver controls four independent relay driver outputs for high/low alarm contacts, generator start functions, load control, temperature control settings and auxiliary AC backup charge control.
* The Relay Driver may be mounted to a DIN rail and is fully programmable with the included PC software via serial RS-232 port connection. Data is stored in non-volatile memory.
* In external slave mode, the Relay Driver can be controlled via the RS-232 serial connection by any MODBUS compatible device, local or remote.
System Voltage
Max Channel Current
Min Operating Voltage
Max Operating Voltage
Self Consumption
Temp Sensor Range
Dimensions
Weight
12-48 Volts
750 mA
8 Volts
68 Volts
<20 mA
-40°C to +85°C
6.4" x 3.2" x 1.3"
(16.3 cm x 8.1 cm x 3.3 cm)
0.4 lb
(0.2 kg)
FREE! Sellers: Add a FREE map to your listings. FREE!
Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application